Conservation control: For a complete closed loop environmental control system look no further than the Hanwell ms1000. The ms1000 system is intended to allow radio sensors to directly replace wired-in sensors in building environmental control where the 3rd party building management system can directly accept analogue or digital signals. To allow greater compatibility with other manufacturers’ BMS systems, the ms1000 can supply relay outputs for alarm or control functions. Further, a single unit can provide a combination of all output types.
Data is read and transmitted by Museum Log sensors to a receiver built into an ms1000 system and the programming contained within reacts to the specific needs of the environment. Built into a wall-mounted case, it contains a DIN rail onto which each ms1000 Mk2 output card is snap-mounted. Each card contains four outputs (either analogue or relay). The system offers unique functionality and is readily expandable, with the effortless addition of output cards, to enhance monitoring and control.
In addition, because the ms1000 system uses radio for the communication between sensors and control system these signals can be monitored and reports generated to ensure that environmental criteria are being met.
We, at Hanwell, are fully aware of the need for environmental monitoring to be as inconspicuous as possible, especially in areas where the public have access. To that end, if you have a need for aesthetic changes, different case style/colour, logo etc. we can accommodate as we have the versatility to design and build units to your own specification. Likewise, if you require the monitoring of any substance or element not mentioned in this brochure, please call as we will, almost certainly, have a solution for you.
|
