The base station receives and processes signals from Hanwell radio and wired sensors. These sensors communicate at regular short intervals with the CR2, which logs and stores the data pending transfer to a PC for analysis and archival storage. Find out more>>

The SR2 is the second generation of the Hanwell Smart Receiver. It is a network enabled receiver, designed for collecting environmental monitoring data from multiple points within a site, or across multiple sites. Find out more>>

Hanwell’s Repeater is a radio telemetry transmitter, used for transparently forwarding radio data between transmitters and base stations, to achieve greater range. Find out more>>

The RL4601 is a three channel transmitter that clamps directly to a 0-120amp cable using the current clamp without any interference with mains connectivity. The clamp simply hooks around the cable and picks up the energy use and feeds this through the transmitter. Find out more>>

The RL4602 is a three channel radio frequency (RF) transmitter that clamps directly to a 0-120amp or 0-600amp cable using either a current clamp or rogowski coil without any interference with mains connectivity. Find out more>>

The RL4603 is a single channel device with a built in GPRS technology. The unit can be used to collect data from electricity, water, gas meters output and energy meters with a suitable output.
Find out more>>

The RL4604 is a single channel pulse counting device with a built in radio frequency (RF) transmitter. The unit can be used to collect data from electricity, water, gas meters output and Energy meters with a suitable output. Find out more>>

The RL4605 is a single channel pulse counting device with a built in GPRS technology. The unit can be used to collect data from electricity, water, gas meters output and energy meters with a suitable pulse output. Find out more>>