Contact Us




Radiologgers:

Radiologgers: Hanwell have integrated 10 years of expertise in the design of data acquisition products, enabling users to seamlessly combine standalone dataloggers, radio telemetry and bus-based instrumentation for use by museums and galleries, large or small.

Our discreet instrumentation continuously and simultaneously manages humidifiers, dehumidifiers and heating systems as well as lux/uv and shock/tilt events, having developed data acquisition systems offering a total solution to many monitoring and data requirements.

A very high degree of flexibility and modularity in the design ensures that customisation and expansion of the system is fully supported. We have also made the redeployment of instrumentation effortless, understanding that clients' processes evolve with time.

An extensive range of data interfaces allow systems to be rapidly adapted for client-specific requirements:
  • Standalone
  • Bus-wired
  • Radio Telemetry
  • Structured Cabling
  • Modem Access via telephone network
  • Internet and email access

There is a choice either to accept data directly into a PC or use a Hanwell system controller to interpret and log data from the system. When the PC is connected and active the controller will act in a transparent manner. When a PC is unavailable the controller will automatically take over the logging tasks.
RADIOLOGGERS: RECEIVERS - click on image or link below for further details
cr1 base station -The base station receives and processes signals from Hanwell radio and wired sensors. These sensors communicate at regular short intervals with this base station, (the cr1) which logs and stores the data pending transfer to a PC for analysis and archival storage.
sr2 base station - The sr2 is the second generation of the Hanwell Smart Receiver. It is a network enabled receiver, designed for collecting environmental monitoring data from multiple points within a site, or across multiple sites.

RADIOLOGGERS: TRANSMITTERS - click on image or link below for further details
rl4001 thermistor - The rl4001 & rl4002 are precision thermistor temperature measuring and radio transmission devices.  The RL4001 has a single channel the rl4002 is dual channel.  The sensors are connected via 2 pin Lemo plugs and sockets.
rl4102 RHT transmitter - The rl4102 is part of the 4000 range of advanced temperature and humidity radio transmitters. They allow wire-free monitoring of a site, with real time alarm notification and historical analysis of data.
rl4106 RHT transmitter - The rl4106 radio transmitter is one of a new range of advanced temperature and humidity radio transmitters. They allow wire-free monitoring of a site, with real time alarm notification and historical analysis of data.
rl4301 radio transmitter - The rl4301 & rl4302 are precision 3- wire PT100 temperature measuring and radio transmission devices. The rl4301 has a single channel the rl4302 is dual channel. The sensors are connected via 5 pin Lemo plugs and sockets. They allow wire-free monitoring of a site, with real time alarm notification and historical analysis of data.
rl4401 radio transmitter - The rl4401 & rl4402 are precision 4-wire PT100 temperature measuring and radio transmission devices. The rl4401 has a single channel the rl4402 is dual channel.
rl5001 radio transmitter - The rl5000 range is a new series of Hanwell radio telemetry transmitters, designed for use with the Radiolog 8 environmental monitoring system. The units are in IP65-rated cases and are suitable for use in tough environments.
rl5002 radio transmitter - The rl5000 range is a new series of Hanwell radio telemetry transmitters, designed for use with the Radiolog 8 environmental monitoring system. The units are in IP65-rated cases and are suitable for use in tough environments.
rl5000 differential pressure - New from Hanwell is the rl5000 dp radiotelemetry transmitter, designed for use withthe Radiolog 8 environmental monitoringsystem. The units are in IP65-rated cases andare suitable for use in tough environments.
ml4701 Lux single channel - The ml4701 Lux transmitter is part of the 4000 range of advanced radio transmitters, allowing wire-free monitoring of a site, with real time alarm notification and historical analysis of data.
ml4703 Lux/UV dual channel - The ml4703 Lux & UV radio transmitter is part of the 4000 range of advanced data loggers, allowing monitoring of a site, with historical analysis of data.
Digital replicator - option 1 - The Hanwell 6-Channel Digital I/O Replicator is designed to transmit information from any volt-free ON/OFF alarm to alarm enunciator panel(s) around a building or site.
Digital repliceator - option 2 - The replicator consists of two discrete sections: the transmitter unit(s) and the receiver unit. The transmitters monitor digital inputs, detecting whether they are open circuit or closed, then send this status back to the receiver via radio signals. The receiver then acts on the signals received: either opening or closing a set of Volt-free switches accordingly.
Wind monitor - The Wind Monitor is a high performance, rugged radio logger. Its simplicity and corrosion resistant construction make it ideal for a wide range of wind measuring applications. The wind speed sensor is a four blade helicoid propeller. Propeller rotation produces an AC sine wave voltage signal with frequency directly proportional to wind speed. Slip rings and brushes are eliminated for increased reliability.
Signal strength meter - Radio reception often seems like a dark art, with signal strength fluctuating according to a variety of factors. From metal racking or shutters to historic building legacies, such as inner walls which were once outer walls, each site presents a unique radio profile. The Signal Strength Meter is a tool designed for analysing that unique profile and taking the arcane mystery out of positioning Hanwell radio equipment.
rl1000 submersible temperature transmitter - The rl1000 submersible temperature transmitter is a radio logger sensor for use in tough environments where there is a requirement for accurate and reliable temperature data without using wiring.
rl8000 radiologger - a highly flexible solution to a wide variety of low-speed instrumentation problems. The unit offers 8 configurable input channels and a variety of communication options including radio telemetry, TCP/IP and direct wired.
1 zone flood alarm - The 1 zone Flood Alarm is a radio transmitter connected to a highly responsive flood detection cable. This cable can be run along key areas enabling rapid notification of water leakage before serious damage is done.
2 zone flood alarm - The 2-zone Flood Alarm is a radio transmitter connected to two highly responsive flood detection cables. These cables can be run along key areas enabling rapid notification of water leakage before serious damage can be done.
8 zone flood alarm - The 8-zone Flood Alarm is a radio transmitter connected to up to eight highly responsive flood detection cables. These cables can be run along key areas enabling rapid notification of water leakage before serious damage can be done.

radiologgers, radio loggers, radio telemetry, radiologger, radio logger, wireless telemetry, wireless, wireless logger, data logger, datalogger, sensor, telemetry, systems, radio, modems, gprs, gsm, gps, hanwell, temperature, rh mapping, ,differential pressure, humidity, lux, UV, flood, alarm, submersible, wind, signal strength, digital replicator,